|
Post by j515op on May 24, 2013 12:42:27 GMT -5
If you have received your Kick Starter reward please reply below with the level of the reward so that the table can be updated. This information can also be move to the Kick Starter comments but it will be easier to track here. To the extent possible the table will also be completed from the KS comments. # | Level | Reserved | Received | Canceled | 1) | $1,449 | 3 | 1 | 1 | 2) | $1,299 | 1 | 0 | 0 | 3) | $1,249 | 8 | 1 | 0 | 4) | $1,099 | 5 | 0 | 0 | 5) | $1,049 | 14 | 4 | 0 | 6) | $1,449 | 3 | 0 | 0 | 7) | $899 | 3 | 0 | 0 | 8) | $499 | 2 | 0 | 0 | 9) | $349 | 6 | 1 | 0 | 10) | $199 | 2 | 2 | 0 | 11) | $150 | 1 | 0 | 0 | 12) | $50 | 1 | 0 | 0 |
|
|
|
Post by notstarman on May 28, 2013 12:11:15 GMT -5
Mike Morrison has opted out. One less $1,449 dollar contributor.
|
|
|
Post by rapidbi on May 29, 2013 1:07:11 GMT -5
notstarmanNot opted out... failure to deliver meant I asked for a refund, this was not forthcoming (not enough money left) so I opted for goods to the value of. I was promised shipping twice - but it did not happen. I would have preferred my promised "pledge" but this was not forthcoming, and my confidence of what I heard about failure to deliver working machines I was not confident that a working unit was shipped. Inconsistent promises and communications led me to take action and not wait an unlimited time for a non-working unit
|
|
|
Post by notstarman on May 29, 2013 12:01:26 GMT -5
I guess my language was imprecise. I just wanted to acknowledged that he had one less bot to ship.
|
|
|
Post by rapidbi on May 30, 2013 13:06:08 GMT -5
NP yes one less to ship, but i see since I posted it has gone quiet from all corners... maybe everyone has their machine and its working fine.... or maybe not
|
|
|
Post by j515op on May 30, 2013 19:02:18 GMT -5
So far not a single person has come forward as having received their reward There are pictures of builders and even one review but what levels those are at are unknown. It would be nice to get at least one data point besides a refund.
|
|
|
Post by bob on May 30, 2013 20:37:01 GMT -5
You should check on twitter, he goes on there every week just about. I haven't received my kit yet. The only evidence of the pi maker working is a picture with a really distorted cube.
|
|
|
Post by notstarman on Jun 4, 2013 9:08:27 GMT -5
I have received the shipping notice for my PiMaker. Could someone update the chart to reflect a $349 bot has shipped.
|
|
|
Post by george on Jun 6, 2013 15:25:40 GMT -5
Hi:
I'm in at a $1000 level. I ordered and want the original Ultra and NOT to the upgrade to the Pi. I'm an old controls engineer and live in the X,Y,Z world. Besides Old Dog and all that stuff
|
|
|
Post by pkocmoud on Jun 19, 2013 9:09:34 GMT -5
I am 1 of the 1449.00 backers. I picked up my Ultra-Bot last month. I have yet to be able to print anything useful, there are serious design issues that need to be resolved. I am committed to resolving them, but it is and never has been print ready.
Phil
|
|
|
Post by briankb on Jun 21, 2013 10:55:53 GMT -5
I am 1 at 1249 Backers and I received my Ultra-Bot Ultra over a month ago and like Phil, it has yet to actually work. When it arrived it was broken in several places and the Z axis all thread were bent. Even after getting the replacement bars and a new set of acrylic the XY carriage does not travel well. As Phil said there are serious design issues.
Brian
|
|
|
Post by j515op on Jun 22, 2013 19:48:34 GMT -5
Well I guess delivery progress is better than no progress. Hopefully we can over come other issues as a community though it sounds disappointing.
|
|
|
Post by j515op on Jul 18, 2013 13:29:49 GMT -5
Updated to include the four Level 5 kits from the Knoxville build party.
|
|